Window closed and every RUN inspected. PCY is confirmed; nothing is provisional.
Where are we losing capacity?
602 minutes did not become good pieces.
- 125minWaiting for a person6.5%
- 120minMaintenance6.3%
- 100minNothing to print5.2%
- 90minWaiting for material4.7%
- 80minOffline or unknown4.2%
- 52minRejected pieces2.7%
- 35minPlate and material changes1.8%
- 20minNobody knows1.0%
No telemetry and no human record. Shown as is — never spread over the other lines.
How this number was calculated
- L3IDLE-WAITING-HUMANWaiting for human125 minBed blocked after PRINT COMPLETE, error waiting to be cleared, confirmation pending.
- L7MAINTENANCEMaintenance120 minPlanned or corrective maintenance windows.
- L1IDLE-NO-WORKIdle · no work100 minMachine available, nothing assigned or nothing compatible to run.
- L2IDLE-NO-MATERIALIdle · no material90 minWork exists, material not loaded / not available on the machine.
- L8OFFLINE-UNKNOWNOffline / unknown80 minMachine not connected, telemetry missing, or piece result never known.
- L6REWORK-SCRAPRework / scrap52 minEquivalent capacity of pieces that did not pass QC.
- L4SETUP-CHANGEOVERSetup / changeover35 minPlate swap, material change, calibration between RUNs.
- L5FAILUREFailure0 minRUN aborted or failed; minutes spent on it before the failure.
67.6% + 31.4% + 1.0% = 100.0%
- Accepted
- 1298 min
- Estimated (QC pending)
- —
- Provisional (RUN open)
- —
- Unaccounted
- 20 min
How each printer did
4 printers counted for Yesterday · Shift A.
- U1-0450.0%Main loss: Waiting for material
Lost 90 min (19% of its day) — mostly waiting for material.
- U1-0362.5%Main loss: Maintenance
Lost 120 min (25% of its day) — mostly maintenance.
- U1-0269.4%Main loss: Nothing to print
Lost 50 min (10% of its day) — mostly nothing to print.
- U1-0188.5%Main loss: Waiting for a person
Lost 25 min (5% of its day) — mostly waiting for a person.
U1-04 is the one pulling the farm down. Lost 90 min (19% of its day) — mostly waiting for material.
Only pieces a person accepted count as production. A finished plate still on the bed is waiting time, not output. Machines count from the moment they are registered; removing one from the calculation is an explicit human action, never an inference.