FILE-0230 · v1

currentintegrity verifiedgcode.3mfBambu Lab H2D immutable · re-analysis = new version

gcode.3mf · Bambu Studio · sliced · 2 plates

  1. PARTHEX-OS-01
  2. →
  3. VARIANTHEX-OS-01-V2
  4. →
  5. FILEFILE-0230-v1
  6. →
  7. FAMILYBambu Lab H2D
Role
production file
Size
31.9 MB
Input hash
sha256 · e40b…7d21
Output hash
9c31…f0aa · analysis v0.9.3

Provenance

bambu-gcode3mf
Source
manual upload · desktop
Adapter
bambu-gcode3mf · full (proven case)
Registered
05 Sep 17:05 · Marina
Parser
farmfly-analysis 0.9.3
Analysis
analysis v0.9.3
slicer
Bambu Studio 2.1.0
declared
printer model
Bambu Lab H2D
declared
nozzle
0.4 mm
declared

Link · PART / Print Variant

pending
Product
Hex Planter
PART
HEX-OS-01 · Outer Shell
Print Variant
Layer
human declaration

Plate 1 resolved to HEX-OS-01 · plate 2 still unresolved — file belongs to independent plates (declared by Marina)

PART identity is a separate resolution layer. The parser never decides which PART a file serves — a human declares it, and “unresolved” is a valid, visible state.

Compatibility · machine family

  • compatibleBambu Lab H2D — printer_model_id matches family · no H2D connected yet — nothing can run
  • incompatibleSnapmaker U1 — different family · never sent to a U1

Plate 1 · shells

PART resolvedObject Manifest · 6
four independent counts
objects
6
declared
instances
6
derived
copies
6
declared
planned units
6
human
time · three values, never collapsed
declared
3 h 34 min
declared
walked
3 h 41 min
walked
reconciled
3 h 41 min
derived
print mode
by-layer
declared
filamentsF1→ PLA Signal OrangePART: HEX-OS-01 · Outer Shell

human declaration

Object Manifest
object_idnamemesh_idgeometry_hashinst.filamentorigin · conf.
obj-11OuterShell labelmesh-h1g:5d2e…1F1factualhigh· geometry_hash equals FILE-0117 obj-1 — diagnostic only, not cross-file identity
obj-12OuterShell labelmesh-h1g:5d2e…1F1factualhigh
obj-13OuterShell labelmesh-h1g:5d2e…1F1factualhigh
obj-14OuterShell labelmesh-h1g:5d2e…1F1factualhigh
obj-15OuterShell labelmesh-h1g:5d2e…1F1factualhigh
obj-16OuterShell labelmesh-h1g:5d2e…1F1factualhigh

Plate 2 · inserts

PART unresolvedObject Manifest · 1
four independent counts
objects
6
declared
instances
6
derived
copies
6
declared
planned units
UNKNOWN
humanno evidence
time · three values, never collapsed
declared
1 h 12 min
declared
walked
1 h 15 min
walked
reconciled
1 h 15 min
derived
print mode
by-layer
declared
filamentsF2→ unmappedPART: unresolved

looks like Hex Planter › Drain Insert by name — a human must declare it; name is never identity

Object Manifest
object_idnamemesh_idgeometry_hashinst.filamentorigin · conf.
obj-21DrainInsert labelmesh-h2g:a90c…6F2factualhigh· 1 object · 6 build instances

Filaments → Production Colors

FarmFly logical layer
refdeclared by fileProduction Colormappingdeclared gwalked g
F1Bambu PLA Basic · Orange · #FF6A13PLA Signal Orangehuman-confirmed129 declared133 walked
F2Bambu PLA Basic · Black · #000000unmappedsuggested48 declared49 walked
consumption breakdown
  • model
    164 g
    walked
  • support
    0 g
    walked
  • purge / flush
    11 g
    walked
  • unclassified
    7 g
    walked

Buckets that cannot be classified stay visible as “unclassified” or UNKNOWN. A per-piece figure is an estimate until allocation is proven (V-14).

Integrity & diagnostics

verified

inputHash checked at registration · no run yet

  • info Proven slicer case: walked consumption and time available per plate.
  • warning Plate 2 has no PART resolution — planned units UNKNOWN until a Print Variant declares them.
  • info F2 → Production Color suggested (Black) · needs human confirmation before any run.

A corrupted or unreadable file is a diagnosed failure — never a silent partial payload. Import and re-analysis are outside this wireframe (V-03 · V-05 · V-07 · V-08 · V-10 · V-11).

Contents · 3MF ↔ G-code

6 entries
  • 3D/3dmodel.modelgeometry
  • Metadata/model_settings.configobjects · names
  • Metadata/slice_info.configdeclared statistics
  • Metadata/plate_1.gcode + plate_1.jsonproduction G-code · plate 1
  • Metadata/plate_2.gcode + plate_2.jsonproduction G-code · plate 2
  • Metadata/plate_1.png · plate_2.pngplate thumbnails

The G-code inside the container is what the machine runs; the geometry and metadata around it are what FarmFly reads. Neither is edited by FarmFly.

Versions

immutable per inputHash
versionstatusinputHashregisterednote
v1currente40b…7d2105 Sep 17:05 · Marinafirst H2D file in the farm · reference for the family split